Adobe Media Encoder 2025 (v25.0) Multilingual PreActivated by m0nkrus

[Farid-Khan]

Year of manufacture : 2024
Version : 25.0.0.054
Platform : Windows x64
Interface language : English / Dutch / Spanish / Italian / Chinese (simplified) / Chinese (traditional) / Korean / German / Polish / Portuguese /

Russian / Turkish / French / Czech / Swedish / Japanese
Remedy : Cured

System Requirements:


64-bit version of Microsoft Windows 10 / 11 (version 22H2 or later) ;

64-bit version of Microsoft Windows 10/11
6th Gen Intel or AMD Ryzen 1000 processor with AVX2 support (11th Gen Intel processor with Quick Sync support or AMD Ryzen 3000 / Threadripper 3000 or later recommended)
8 GB RAM (16 GB recommended for HD media; 32 GB for 4K media)
8 GB of free hard disk space; Additional free space is required during installation
Video card with 2 GB of video memory (8 GB recommended)
1024x768 (VGA) screen resolution (1920x1080 or higher recommended; DisplayHDR 1000 for HDR workflows)
Sound card supporting ASIO or Microsoft Windows Driver Model
1 Gbps network card for HD media sharing (10 Gbps recommended for 4K media sharing)
Internet connection and registration required to access online services

Description:
Adobe Media Encoder is an encoding program that lets you encode audio and video files into a variety of distribution formats for different applications and audiences. Such video and audio formats are characterized by a high degree of compression. Using this program, you can export videos to formats supported by a variety of devices, from DVD players and websites to mobile phones, portable media players and standard-definition and high-definition TVs.

List of changes made

• The assembly is based on the standalone Adobe installer version 6.4.0.359, which is not available to the general public.
• The Adobe Desktop Common module, which must be installed by the original installer, has been removed from the installer, with the exception of the required minimum.
• The Adobe Creative Cloud module, which is required to be installed by the original installer, has been completely removed from the installer.
• The mechanism for selecting the interface language of the installed program, which was broken by the developers, has been restored.
• The installer provides a choice of installation path and program interface language, as well as the ability to launch the program immediately after installation is complete.
• Unlocked the ability to install the program on Windows 10 lower versions.
• Disabled spy modules CRLog Transport Application and Adobe Crash Report.
• The program has already been treated. Can be used immediately after installation.

FAQ
Question: I can't click the Continue button because the contents of the window don't fit in the window itself and the button is out of sight. What to do?
Answer: This rarely happens on crookedly configured operating systems. There is a TAB key on your keyboard. Click it to the desired menu item.

Question: The installation was not completed due to an unknown error. What to do?
Answer: Check out

            
                
                
                    
                   ⚠
                    A kód megtekintéséhez jelentkezz be.
					Please log in to view the code.
                
            
        

the explanation of error codes . I also recommend studying the installation log. It is located at C:\Program Files (x86)\Common Files\Adobe\Installers\Install.log. Perhaps here you will get more detailed information about the problem and how to fix it.

Question: I have a problem at the initial stage of installation, not described above. Can you give me some advice?
Answer: Try replacing the Set-up.exe file used in the distribution with the one downloaded

            
                
                
                    
                   ⚠
                    A kód megtekintéséhez jelentkezz be.
					Please log in to view the code.
                
            
        

from here .

Question: What's wrong with disabling spy modules?
Answer: The spyware modules CRLog Transport Application (CRLogTransport.exe) and Adobe Crash Reporter Service (AdobeCrashReport.exe) are disabled. The files that initialize them have been renamed to CRLogTransport.exe.bak and AdobeCrashReport.exe.bak, respectively. If you suddenly want to restore their functionality, simply remove the .bak extension from them. Anticipating the question of some users why AdobeIPCBroker.exe is not blocked, I want to say that without it some online services will not work.

Question: What about medications for this version of the program?
Answer: Using the uncia & CGP Co method, several files were patched, which I then built into the installer. You don't need to do anything for treatment! Just in case, the original files are saved with the extension *.bak. To restore them, remove the .bak extension from these files and replace the existing patched files with them.

Question: Some time after launching the program, I began to receive a pop-up notification that the trial period was about to end. What to do?
Answer: To solve this problem, the medicine has a built-in mechanism that blocks access to a number of IP addresses and a number of hosts. For these purposes, Windows Firewall (Defender) and the hosts file are used. Unfortunately, the blocked list changes periodically. But we can also dynamically correct it! To do this, run the file ..\Adobe 2025\packages\setup.exe from the distribution and with the Internet on. After a few seconds, the blocked list will be updated and the pop-up notification will stop bothering you. If this does not happen, then either you are using a third-party firewall, and it ignores the connection rules specified in Windows Firewall, or some software installed on you is blocking changes to the hosts file, or the hosts file is ignored by the system, since access to the network is for your programs are accessed through a proxy or VPN. In the first case, I recommend blocking network access to the main Adobe executable file Adobe Media Encoder.exe, the launch of which initiates the appearance of the unfortunate notification. In the second, check whether the hosts file has the "Read Only" attribute and whether your antivirus is blocking changes to this file. In the third, all hope is only for the rule in the firewall; if you are using a third-party firewall, then the recommendations are the same as for the first case, and if not, then check if there is a rule for outgoing connections "Adobe Unlicensed Pop-up" in Windows Firewall - it should be there.

Question: When I run the program, it closes with error 0xc0000142! What's wrong?
Answer: Starting with version 24.1, this program requires your processor to support Advanced Vector Extensions 2 (AVX2) instructions. If the processor does not support this technology, then the program will not start, producing the same error. I recommend "rolling back" to a version of the program younger than 24.1.

Question: When opening the program, the error "Adobe Creative Cloud, needed to resolve the problem, is missing or damaged..." appears. What to do?
Answer: You have "tails" left in your system from previous installations of Adobe Creative Cloud components. They need to be removed. To do this, use

            
                
                
                    
                   ⚠
                    A kód megtekintéséhez jelentkezz be.
					Please log in to view the code.
                
            
        

the Adobe Creative Cloud Cleaner Tool . For the component to remove, select first All, and then Adobe Creative Cloud Desktop. After this, reinstall the failed program. Such cleaning and reinstallation will not harm previously installed programs.

Question: I can't log into the program. The authorization window behaves incorrectly. What to do?
Answer: Try closing the program and temporarily moving the folder C:\Program Files\Common Files\Adobe\Adobe Desktop Common\NGL somewhere. After that, launch the program again and try to log in. Deleting this folder should initiate an alternative authorization option - using a browser.

Question: Is it possible to switch the program interface language?
Answer: Yes, you can. The program is installed immediately with all available languages and has a standard switch for them. Open the menu "Edit->Settings...->Appearance->Language" (Edit->Preferences...->Apperance->Language) and set the desired interface language.

Question: Is it possible to make the interface bilingual so that, for example, it is in Russian and duplicated in English in parentheses?
Answer: Yes. With the program running, press the key combination Ctrl+F12, and in the Console panel, switch (icon with three bars) to Debug Database View mode. Opposite ApplicationLanguageBilingual, replace false with true. After that, restart the program and enjoy the bilingual interface.

️ Adobe Media Encoder 2025 (v25.0) Multilingual PreActivated by m0nkrus (1.43 GB)
NitroFlare Link(s) (Premium Link)

            
                
                
                    
                   ⚠
                    A kód megtekintéséhez jelentkezz be.
					Please log in to view the code.
                
            
        

RapidGator Link(s)

            
                
                
                    
                   ⚠
                    A kód megtekintéséhez jelentkezz be.
					Please log in to view the code.